External hard drives are frequently affected by I/O device errors. Anyone know how to fix this External Hard Disk I/O Device Error?
1 Like
The next thing you can do is plug in a different USB port, update the driver, or run CHKDSK in Command Prompt.
To fix an External Hard Disk I/O Device Error, first check all physical connections (cables, ports, power supply). Try different cables or USB ports. Then, in Device Manager, update or reinstall the drive’s drivers . Running CHKDSK via Command Prompt can also help fix file system errors.
In order to correct an External Hard Disk I/O device Error, the following should be first done: Verification of all physical connections (cables, Ports, Power Supply). Use other cables or USB ports. Next, in the Device Manager, update or reinstall the drivers of the drive. It is also possible to resolve file system errors by using Command Prompt and running CHKDSK.
When an I/O device error occurs on an external hard disk, it is most likely that there is an impediment in the communication between the drive and the computer. To repair this, an attempt was made to have a look at the cable connection and port connections of the USB, update or install the latest driver, perform disk error checks or change the mode of transfer of the drive.
To fix an external hard disk I/O device error, first check the USB port and cable connection. Try using a different port or system. Update or reinstall the disk drivers via Device Manager. Run CHKDSK using Command Prompt: chkdsk /f /r X: (replace X with your drive letter). If errors persist, consider formatting or replacing the disk.
To fix an external hard disk I/O device error, try these steps:
- Check and reconnect the USB cable or try a different port.
- Restart your computer.
- Update or reinstall disk drivers via Device Manager.
- Run CHKDSK by typing
chkdsk /f /r X:in Command Prompt (replace X with your drive letter). - If the issue persists, test the drive on another computer.